Course guide · checked November 2026

Neso Academy's Computer Networks course: is it enough, what it covers, and free notes

Neso Academy's Computer Networks playlist is one of the most watched free CN courses for Indian CS students: its first lecture alone has over 3 million views. It's 130 videos on YouTube, about 19 hours, covering the first three of the course's eight chapters. This page shows what those chapters cover against the GATE CS syllabus, what the free playlist leaves out, a study plan, and free notes for all 43 topics.

  • Free
  • YouTube
  • 43 topics
  • 130 videos
  • 19 hours
  • GATE CS and university exams

An independent guide by HoverNotes. Not affiliated with Neso Academy or the GATE organizing institutes.

Is it enough for computer networks and GATE?

For the first half of the subject, yes. The free playlist teaches layering, the data link layer and IPv4 subnetting slowly and clearly, with plenty of solved problems, and learners on r/GATEtard call Neso enough for college coursework. For GATE, not on its own: the free videos stop after subnetting. Routing, TCP, NAT, DNS and HTTP are on the GATE 2027 syllabus, but they're in chapters 4 to 8, which are only on Neso Academy's site with a paid plan. Pair it with a free source for the upper layers and GATE previous-year questions.

What it does well

  • Free and clear for the basics: 130 videos (about 19 hours) for chapters 1 to 3, and Neso Academy's slides for those three chapters aren't locked on its site.
  • Built around problems: 34 solved-problem videos (stop-and-wait and sliding windows, CRC, Ethernet, classful addressing, and 12 on subnetting alone), the kind of numericals GATE and semester papers set.
  • Short videos: the median is 8 minutes and 88 of the 130 are under 10 minutes, so one sitting covers a topic.
  • The data link layer in depth: 64 videos and 8.3 hours on framing, error detection, flow control, ALOHA and CSMA, Ethernet, Wi-Fi, VLANs and spanning tree.
  • Hands-on: 9 Cisco Packet Tracer and simulation videos (hubs, switches, routers, classful addressing, subnetting) show the theory working on a simulated network.

Where it leaves gaps

  • It stops at subnetting. Neso Academy's site lists 8 chapters and 248 lectures; the free playlist is chapters 1 to 3 (130 lectures). Chapters 4 to 8 (network layer protocols, routing, NAT and IPv6, transport, application layer and security) need Neso Fuel, priced by country: a year cost between $29 and $69 when we checked.
  • So half the GATE 2027 syllabus isn't in the free videos: distance vector and link state routing, IPv4 fragmentation, NAT, TCP flow and congestion control, sockets, DNS and HTTP.
  • Some time goes to topics GATE 2027 no longer lists: framing protocols (HDLC, BISYNC, PPP, DDCMP), Bluetooth, VLANs and spanning tree, classful addressing. They're useful for university syllabi; skim them if you're only preparing for GATE.
  • Little practice beyond the worked problems: on Neso's site the chapter 1 quiz is free and the quizzes for chapters 2 to 8 are locked.
  • Recorded from 2019 to 2022. The basics haven't changed, but the course wasn't built around the slimmer GATE 2027 syllabus.

What to pair it with

Sources: Neso Academy: Computer Networks (chapters and lectures) · Neso Academy: Computer Networks slides · Neso Academy: Neso Fuel plans · GATE 2027 CS syllabus (IIT Madras, PDF) · r/GATEtard: How is Neso Academy for GATE preparation? · r/GATEtard: Neso for college, a GATE course after · GATE Overflow: computer networks resources

What it covers, by chapter

Every video in the free playlist, in Neso Academy's own chapters, next to the GATE 2027 CS syllabus topics each chapter teaches. Hours include the lab videos.

Chapter GATE syllabus Topics Video Share of video
1. Introduction to Computer Networks Principles of layering; circuit, packet and virtual-circuit switching 1–13 5.6 h 30%
2. Data Link Layer Error detection, medium access control, Ethernet, performance metrics (delay, throughput); sliding-window flow control, which GATE asks with TCP 14–33 8.3 h 44%
3. Logical Addressing & Subnetting IPv4 addressing and CIDR notation 34–43 4.8 h 26%
4. Network Layer Protocols Starts with ARP (ARP, DHCP and ICMP are no longer listed for GATE 2027) Neso Fuel (28 lectures) — —
5. Routing Protocols Distance vector and link state routing Neso Fuel (34 lectures) — —
6. NAT & IPv6 Network Address Translation Neso Fuel (10 lectures) — —
7. Transport Layer TCP flow control and congestion control, socket API Neso Fuel (31 lectures) — —
8. Application Layer & Security DNS and HTTP Neso Fuel (15 lectures) — —

Of the GATE 2027 Computer Networks syllabus, the free videos teach layering, switching, performance metrics, error detection, medium access control, Ethernet, and IPv4 addressing with CIDR. They don't teach routing, IPv4 fragmentation, NAT, TCP, the socket API, DNS or HTTP. Chapters 4 to 8, which cover routing, NAT, the transport layer and the application layer, are only on nesoacademy.org with a paid Neso Fuel plan.

By the numbers

  • Data Link Layer takes the most time: 8.3 of 19 hours, 44% of the free video.
  • 5 of the course's 8 chapters aren't in the free playlist: Network Layer Protocols, Routing Protocols, NAT & IPv6, Transport Layer, Application Layer & Security.
  • 9 lab videos make up 8% of the course (1.5 hours), next to 121 lectures (17 hours).
  • The median video is 8 min; the longest is Spanning Tree Protocol (STP) (20 min).
  • A typical topic is 26 min of video, lab included. The longest is topic 7, Layering and the OSI model (52 min).

Computed from the course playlist on 2026-11-02. Chapters as Neso Academy numbers them on its site; syllabus topics from the GATE 2027 CS syllabus.

All 43 topics, with links to each video
  1. Chapter 1: Introduction to Computer Networks

    1. What a network is

  2. 2. Protocols and communication

  3. 3. Components and types of networks

  4. 4. Network topology

  5. 5. IP, MAC and port addresses

  6. 6. Switching techniques

  7. 7. Layering and the OSI model

  8. 8. Addressing and the TCP/IP suite

  9. 9. Networking commands

  10. 10. Packet Tracer: hubs and switches

  11. 11. Routers, repeaters and bridges

  12. 12. Network devices compared

  13. 13. Physical layer and media

  14. Chapter 2: Data Link Layer

    14. Data link layer services

  15. 15. Framing

  16. 16. HDLC and bit stuffing

  17. 17. BISYNC, PPP and DDCMP

  18. 18. Error detection: parity, LRC, checksum

  19. 19. Cyclic redundancy check

  20. 20. Delay, bandwidth and RTT

  21. 21. Flow control and stop-and-wait

  22. 22. Sliding window and Go-Back-N

  23. 23. Selective repeat and window sizes

  24. 24. Multiple access and ALOHA

  25. 25. CSMA, CSMA/CD and CSMA/CA

  26. 26. Controlled access and channelization

  27. 27. Ethernet

  28. 28. Ethernet backoff and solved questions

  29. 29. Wi-Fi (IEEE 802.11)

  30. 30. Hidden and exposed terminals, MACA

  31. 31. Bluetooth

  32. 32. VLANs

  33. 33. Spanning Tree Protocol

  34. Chapter 3: Logical Addressing & Subnetting

    34. IPv4 addresses

  35. 35. Classful addressing

  36. 36. Unicast, multicast, broadcast; class questions

  37. 37. Public and private addresses

  38. 38. Classless addressing (CIDR)

  39. 39. Subnetting

  40. 40. Subnetting practice, part 1

  41. 41. Subnetting troubleshooting and practice, part 2

  42. 42. Subnetting practice, part 3

  43. 43. FLSM and VLSM

A 6-week study plan

4–6 hours a week: about 3 hours of video, the rest for notes and solving problems on paper.

  1. 1 Week 1, chapter 1 (topics 1–8): what a network is, protocols, topologies, the three kinds of address, switching, the OSI model and TCP/IP. The OSI videos (topic 7, about 50 minutes) are worth a second watch: every later chapter refers to the layers.
  2. 2 Week 2, the rest of chapter 1 and the start of chapter 2 (topics 9–19): networking commands, Packet Tracer, devices, the physical layer, then framing and error detection up to CRC. Install Cisco Packet Tracer and follow along.
  3. 3 Week 3, chapter 2 (topics 20–25): delays and RTT, stop-and-wait, Go-Back-N, selective repeat, ALOHA and CSMA. This is the most numeric part of the free course; solve each problem before the video does.
  4. 4 Week 4, chapter 2 (topics 26–33): controlled access, Ethernet, Wi-Fi, Bluetooth, VLANs and spanning tree. If you're only preparing for GATE, go faster through Bluetooth, VLANs and spanning tree.
  5. 5 Week 5, chapter 3 (topics 34–43): IPv4, classful and classless addressing, subnetting, FLSM and VLSM. Repeat the subnetting problems until finding the network, broadcast and host range is quick.
  6. 6 Week 6 and after: routing, IPv4 fragmentation, NAT, TCP, DNS and HTTP from Kurose & Ross's free lectures or your textbook (or Neso Fuel), then GATE previous-year questions chapter by chapter.

Free notes for all 43 topics

Our own study notes, one section per topic: the key ideas, the formulas and worked methods, and what to remember for the exam. Free, no sign-up. Read topic 1 below.

1. What a network is

Chapter: 1. Introduction to Computer Networks · Videos: Introduction to Computer Networks (10 min) · Basic Characteristics (9 min)

Key ideas

  • A computer network is a group of nodes joined by communication links. A node is any device that can send data, receive data, or both: PCs, servers, printers, IP cameras, and also switches and routers.
  • A link only carries the signal. It is either wired (copper or fibre cable) or wireless (radio through the air, as between two phones or a laptop and a Wi-Fi router).
  • End devices are where a communication starts or finishes (your laptop, the web server). Intermediary devices pass data along in between (switches, wireless routers, routers, the many boxes inside “the Internet” cloud).
  • The main reason to build a network is resource sharing: four PCs can share one printer, one file server, one Internet connection.
  • The course opens by saying who it is for: undergraduates, GATE aspirants, people preparing for networking interviews, and as groundwork before CCNA. It uses Cisco Packet Tracer for the practical side.
  • Four characteristics every network should have:
    • Fault tolerance: keeps working when a link or device fails, by sending traffic another way (like taking a detour when your usual road home is blocked). Needs redundant paths.
    • Scalability: can grow, more users and devices, without performance falling apart. The Internet is the standard example.
    • Quality of service (QoS): decides what goes first when traffic competes. A router holding a VoIP packet and an email packet sends the voice first, because a one-second delay ruins a call and doesn’t matter for an email.
    • Security: blocks forgery, misuse and access by people who shouldn’t have it, and provides confidentiality (only the sender and receiver can read it), integrity (what arrives is what was sent) and availability (the service stays reachable).

Remember for the exam

  • “Node” is broader than “computer”: anything that sends or receives data counts, including routers and switches.
  • End device vs intermediary device is about the device’s role in this communication, not its brand. A PC is an end device; a router forwarding your packets is an intermediary.
  • QoS exists because real-time traffic (voice, video calls) can’t tolerate delay or loss, while email and file transfers can wait.
  • The security goals are the CIA triad: confidentiality, integrity, availability. Defacing or flooding a web server attacks availability.

Check yourself

  1. Is a network printer a node? (Yes: it receives data, and often sends status back.)
  2. In a home with a laptop, a Wi-Fi router, a modem and a Netflix server, which are end devices? (The laptop and the Netflix server; the router and modem pass data along.)
  3. A router drops a link and traffic still reaches the server through another router. Which characteristic is that? (Fault tolerance.)
  4. Why does a router send a VoIP packet before an email packet that arrived at the same time? (QoS: voice is real-time and can’t wait; email can.)

Do next

Draw a small network you use every day (home or college lab), label each device as end or intermediary, and mark the wired and wireless links. Then watch the two videos on protocols, which explain the rules those devices follow to talk.

Take your own notes while you watch

Notes you write yourself stick better than any download. HoverNotes puts a notes panel beside the video on YouTube.

  1. 1. Open the lecture on YouTube

    Click the HoverNotes button on the video and choose Video Mode. The video and your notes sit side by side.

  2. 2. Grab the slides you need

    One click screenshots a diagram, frame format or solved-problem slide into your note, with a timestamp that jumps back to that moment.

  3. 3. Solve it before the video does

    Pause at each solved problem, write your working in the note, then compare. AI Notes can draft notes while you watch if you want (20 free minutes, then a paid plan).

  4. 4. Keep the notes where you study

    Notes save as Markdown to a folder or your Obsidian vault, one file per topic, ready to revise before the exam.

Reviews from people taking the course

Every review comes from someone learning this course with HoverNotes, with how long they've studied it. No reviews yet.

    FAQ

    Neso Academy Computer Networks: common questions

    Is Neso Academy enough for computer networks and GATE?+

    For what it covers (the introduction, the data link layer, and IPv4 addressing and subnetting) it's thorough, and learners call Neso enough for college coursework. For GATE, the free YouTube playlist isn't enough on its own: it ends after subnetting, and routing, TCP, NAT, DNS and HTTP are on the GATE 2027 syllabus but in Neso's paid chapters 4 to 8. Add a source for those and practise GATE previous-year questions.

    Is Neso Academy's Computer Networks course free?+

    The first three chapters are: 130 videos on YouTube, and their slides on nesoacademy.org. Chapters 4 to 8 (118 lectures), most of the quizzes and the remaining slides need Neso Fuel, a paid plan for 1, 6 or 12 months that unlocks Neso Academy's whole library. Prices depend on your country; a year cost between $29 and $69 when we checked.

    How long is Neso Academy's Computer Networks course?+

    The free playlist is 130 videos and about 19 hours. Most videos are short (the median is 8 minutes). The full course on Neso's site has 248 lectures. At about 3 hours of video a week, the free part takes 5 to 6 weeks.

    Does the free playlist cover TCP and routing?+

    No. It covers chapters 1 to 3: the introduction (layering, OSI, TCP/IP, devices), the data link layer, and IPv4 addressing and subnetting. Routing protocols, NAT and IPv6, the transport layer (TCP, UDP) and the application layer are chapters 4 to 8, on nesoacademy.org with Neso Fuel. The YouTube playlist ends with short trailers for those chapters.

    Where can I get Neso Academy computer networks notes or a PDF?+

    Download our free notes on this page, as a PDF or Markdown: one section for each of the 43 topics in the free playlist, with the formulas, worked examples and questions to test yourself. They're our own notes, not Neso's slides. Neso Academy's own slides for chapters 1 to 3 are on its site; the rest need Neso Fuel.

    Which textbook goes with Neso Academy's Computer Networks?+

    For university exams, use the book your syllabus names (Forouzan, Tanenbaum and Kurose & Ross are the usual ones). For GATE, GATE Overflow's resource page recommends Peterson & Davie, which is free to read online, and the authors of Kurose & Ross have free video lectures for the transport, network and application layers that the free playlist doesn't cover.